Optics

DP1-FV

DP2-MV

DP3-MV

DP6-MV

DP6-AV

Accessories

Motorized Zoom

The stepper motor driven zoom lens is controlled by host computer. The software divides the total zoom range in to 11 steps. Before using the software, the calibration should be done first at those steps and calibration values are stored in the computer. The software will load the calibration values when the software starts. When you select a different step, the software will drive the motor to change the zoom and recall the calibration for the step. You can mix the zoom steps in a part program. When running the part program, the software will change the zoom steps and calibration values accordingly.

For detail information and options about the lens, view Optem 125C brochure (1M).

Other optics is available.